Engineering, 07.11.2020 20:30 kaitlyn114433

PLEASE HELP (Its due today pls help) I will give 40 points 1.
What is the amperage rating of an electrical device that uses 12 kilowatts of electricity when operated for 6 hours in a 120-volt circuit?

2.
How many watts will be used in 16 hours if an electric motor requires 5.5 amperes of electricity, and is on a 120 volt electrical circuit 10 hours?

3.
An agricultural mechanics shop has five 120 watt lights, a 700-watt saw and a 120-watt fan that were used for 6 hours. How many KILOWATTS of electricity were used?

4.
What is the amperage of a circuit with ten 100 watt light bulbs in a 120-volt circuit?

5.
If electricity costs $0.12 per kilowatt hour, how much does it cost to operate a router which requires 12 amperes of electricity and is used in a 120 volt electrical circuit for 4 hours?

6.
If the local rate for electricity is $.11 per kilowatt hour, how much should the electric bill be for 240 kilowatt hours?

7.
If the local rate for electricity is $0.07 per kilowatt hour, how much does it cost to operate an electric motor requiring 25 amperes of electricity if used in a 120 volt circuit for one hour?

8.
What is the watt rating of a portable electric drill with 40 amps and 120 volts?

9.
How many watts of current does an electric motor which requires 10 amperes of electricity and is designed to be used in a 120 volt electrical circuit use in one hour?

10.
How many kilowatts of current does a portable saw that requires 12 amperes of electricity and is designed to be used in a 120-volt electrical circuit use in one hour?

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

Answer

Engineering, 04.07.2019 03:10

What precautions should you take to prevent injuries when dealing with heavy loads?

Answers: 1

Answer

Engineering, 04.07.2019 16:10

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

Answer

You know the right answer?

PLEASE HELP (Its due today pls help) I will give 40 points 1.
What is the amperage rating of...

Questions