subject
Engineering, 08.11.2020 15:10 xemnas1994

Evaluate the following integrals: i. ∫4(1−−43 +25) 0 ii. ∫3(2) 0 a) Analytically b) Multiple application of Trapezoidal rule n = 4. c) Simpson’s 1/3 rule for n = 4. d) Simpson’s 1/3 and Simpson’s 3/8 rule for n = 5. e) Determine the true percent relative error.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:10
Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery
Answers: 2
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
question
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
You know the right answer?
Evaluate the following integrals: i. ∫4(1−−43 +25) 0 ii. ∫3(2) 0 a) Analytically b) Multiple applica...
Questions
question
History, 26.06.2019 17:00
question
Mathematics, 26.06.2019 17:00
Questions on the website: 13722361