Engineering, 09.11.2020 16:50 avambrown05

Consider an ideal turbojet at flight conditions: To =220 K, PO = 20 kPa, and Mo= 0.8. Calculate and plot: 1) the specific thrust, 2) f, and 3) ISP versus the compressor stagnation pressure ratio (πc). Perform calculations for Tt, A=1600 K and 1800 K and for πc from 1 to 50. The fuel heat of combustion is hf= 42,800 kJ/kg. What πc maximizes thrust at the two peak stagnation temperatures?

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?

Answers: 3

Answer

Engineering, 04.07.2019 19:20

Apure substance is a)-mixture of various chemical elements or compounds b)-substance that has a fixed chemical composition throughout c)-mixture that is homogeneous (such as air) d)-all the answers

Answers: 3

Answer

You know the right answer?

Consider an ideal turbojet at flight conditions: To =220 K, PO = 20 kPa, and Mo= 0.8. Calculate and...

Questions