A cylindrical specimen of Aluminium having a diameter of 12.8 mm and gauge length of 50.8 is pulled in tension. Use the data given below to:A) Plot the data as engineering stress versus engineering strain. B) Compute the modulus of elasticity. C) Determine the yield strength at a strain offset of 0.002. D) Determine the tensile strength of this alloy. E) What is the approximate ductility, in percent elongation?Load (N) Length0 50.8007330 50.85115100 50.90223100 50.95230400 51.00334400 51.05438400 51.30841300 51.81644800 52.83246200 53.84847300 54.86447500 55.88046100 56.89644800 57.65842600 58.42036400 59.182

Hello the needed data given is not properly arranged attached below is the properly arranged data

b) 62.5 * 10^3 MPa

c) ≈ 285 MPa

d)  370Mpa

e)  16%

Explanation:

Given Data:

cylindrical aluminum diameter = 12.8 mm

Gauge length = 50.8 mm

A) plot of engineering stress vs engineering strain

attached below

B ) calculate Modulus of elasticity

Modulus of elasticity = Δб / Δ ε

                                   = ( 200 - 0 ) / (0.0032 - 0 ) = 62.5 * 10^3 MPa

C) Determine the yield strength

at strain offset = 0.002

hence yield strength ≈ 285 MPa

D) Determine tensile strength of the alloy

The tensile strength can be approximated at 370Mpa because that is where it corresponds to the maximum stress on the stress  vs strain ( complete plot )

E) Determine approximate ductility in percent elongation

ductility in percent elongation = plastic strain at fracture * 100

total strain = 0.165 , plastic strain = 0.16

therefore Ductility in percent elongation = 0.16 * 100 = 16%

answer:

what work

explanation: