A force measurement system (weight scale) has the fallowing specifications: Range: 0 to 1000N

Linearity error 0.10% FSO

Hysteresis error 0.10% FSO

Sensitivity error 0.15% FSO

Zero Drift 0.20% FSO

Required:

Estimate the overall instrument uncertainly for this system based on available information.

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.

Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false