Engineering, 12.11.2020 19:10 DefineSilver3837

From the data listed, use the average area method to calculate cut, fill, and cumulative volumes in cubic yards between stations 10 00 and 20 00. Use an expansion factor of 1.50 for fills. Station Cut Fill 10 00 0 11 00 174 12 00 348 13 00 371 14 00 146 14 20 0 0 15 00 142 16 00 23817 00 305 18 00 247 19 00 138 20 00 106

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above

Answers: 1

Answer

Engineering, 04.07.2019 18:20

An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid

Answers: 3

Answer

Engineering, 04.07.2019 19:10

With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.

Answers: 1

Answer

You know the right answer?

From the data listed, use the average area method to calculate cut, fill, and cumulative volumes in...

Questions