Engineering, 14.11.2020 22:00 sierravick123owr441

The power available from a wind turbine is calculated by the following equation: P=1/2A ρv^3
where P 5 power [watts], A=sweep area (circular) of the blades [square meters], ρ=air density [kilograms per cubic meter], and v=velocity [meters per second]. The world’s largest sweep area wind turbine generator in Spain has a blade diameter of 420 feet [ft]. The specific gravity of air is 0.00123. Assuming a velocity of 30 miles per hour [ mi/h] and the power produced is 5 megawatts [MW], determine the efficiency of this turbine.

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa

Answers: 1

Answer

You know the right answer?

The power available from a wind turbine is calculated by the following equation: P=1/2A ρv^3
...

Questions

SAT, 13.07.2019 19:00

Which of the following could prevent ear muffs from providing your ears good protection from noise...