Engineering, 16.11.2020 18:30 eric271828

Use MATLAB to design a 4th order lowpass Butterworth digital filter with a bandwidth of 0.35 (normalised with respect to πfs). Then, a. Find the parameters of the equivalent analogue filter through bilinear transformation considering a sampling frequency of 10 Hz. b. What are the passband and stopband frequencies of both analogue and digital Butterworth filters. c. Draw the pole-zero diagram of the digital filter. d. Apply the input x[n] = 2sin(10πt) + 5cos(24πt) to the system and comment on the output. Use frequency response to enhance your conclusions.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 03:10

What precautions should you take to prevent injuries when dealing with heavy loads?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Amixture of slurry and mud is to be pumped through a horizontal pipe of diameter 500 mm. the fluid behaves as a bingham plastic with a yield stress of 30 pa and viscosity 0.04 pa.s. describe the effects of the shear stress through a transverse section of the pipe by plotting the variation in shear stress and velocity profile: (i) just before the slurry starts to move (ii) as the slurry flows when the pressure gradient is double that in part (i)

Answers: 3

Answer

You know the right answer?

Use MATLAB to design a 4th order lowpass Butterworth digital filter with a bandwidth of 0.35 (normal...

Questions