Engineering, 17.11.2020 19:20 carlo123
NEED OIL NEED OIL NEED OIL NEED OIL NEED OIL NEED OIL NEED OIL NEED OIL NEED OIL NEED OIL NEED OIL NEED OIL NEED OIL NEED OIL NEED OIL NEED OIL GIVE OI
Answers: 3
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
Engineering, 06.07.2019 04:10
Natural gas (95 percent methane and 5 percent ethane by volume) flows through a 90 cm diameter pipeline with a velocity of 3 m/s. the pressure in the pipeline is 700 kpa, and the temperature is 15°c. calculate: (a) the mass and volumetric flow rates in this pipe.
Answers: 1
NEED OIL NEED OIL NEED OIL NEED OIL NEED OIL NEED OIL NEED OIL NEED OIL NEED OIL NEED OIL NEED OIL N...
Computers and Technology, 31.07.2021 01:00
Mathematics, 31.07.2021 01:00
Mathematics, 31.07.2021 01:00
Mathematics, 31.07.2021 01:00
History, 31.07.2021 01:00
Mathematics, 31.07.2021 01:00