Engineering, 17.11.2020 21:10 Cayden7950
A cyclist is turning the pedals of his bicycle at a speed of 60RPM while exerting a torque of 1 lb-ft. The input sprocket has 40 teeth. What is the number of teeth on the output sprocket, if the driven wheel is rotating at 240 RPM?
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
You know the right answer?
A cyclist is turning the pedals of his bicycle at a speed of 60RPM while exerting a torque of 1 lb-f...
Questions
Chemistry, 20.01.2021 02:20
Spanish, 20.01.2021 02:20
Physics, 20.01.2021 02:20
Mathematics, 20.01.2021 02:20
Mathematics, 20.01.2021 02:20
Mathematics, 20.01.2021 02:20
Biology, 20.01.2021 02:20
English, 20.01.2021 02:20
Mathematics, 20.01.2021 02:20
