Engineering, 18.11.2020 08:10 YuliaTyson6080
I NEED ASP 30P
Match the real-world problem to the STEM education course that would analyze it.
1. develop a solar-powered computer
technology
2. prevent endangered species
science
3. analyze population growth issues
engineering
4. reduce automobile gas emissions
mathematics
Answers: 2
Engineering, 04.07.2019 18:10
Fluids at rest possess no flow energy. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
I NEED ASP 30P
Match the real-world problem to the STEM education course that would analyze it.
Mathematics, 14.12.2020 19:00
Mathematics, 14.12.2020 19:00
Mathematics, 14.12.2020 19:00
Mathematics, 14.12.2020 19:00
Mathematics, 14.12.2020 19:00
Mathematics, 14.12.2020 19:00
Computers and Technology, 14.12.2020 19:00