Engineering, 18.11.2020 16:50 HyperT1676
A 1-in (internal diameter) pipe is used to supply water to a low-pressure tank with an MAWP of 20 psig. The water is supplied through a regulator from a source with a maximum pressure of 100 psig. Determine the diameter of a conventional spring-operated relief required to protect the vessel from a regulator failure. Be sure to state clearly any assumptions and your justifications for them.
Answers: 2
= 
= 3.4 inches 
Another question on Engineering
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
Engineering, 04.07.2019 18:20
What is the heat treatment of metals? what is the benefit of it? why and how it's useful? answer in details, do not write by hand.
Answers: 3
You know the right answer?
A 1-in (internal diameter) pipe is used to supply water to a low-pressure tank with an MAWP of 20 ps...
Questions
Chemistry, 04.05.2021 02:50
Chemistry, 04.05.2021 02:50
Biology, 04.05.2021 02:50
English, 04.05.2021 02:50
Mathematics, 04.05.2021 02:50
English, 04.05.2021 02:50
Mathematics, 04.05.2021 02:50
Mathematics, 04.05.2021 02:50
English, 04.05.2021 02:50
Mathematics, 04.05.2021 02:50
