Engineering, 18.11.2020 17:10 tejasheree
For a RC Low Pass filter, what is the approximate amplitude (as a decimal proportion of input amplitude) at 1/4 the cutoff frequency?
Answers: 3
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 19:10
What is the main objective of using reheat rankine cycle?
Answers: 3
Engineering, 04.07.2019 19:10
With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.
Answers: 1
For a RC Low Pass filter, what is the approximate amplitude (as a decimal proportion of input amplit...
History, 02.02.2021 20:20
Biology, 02.02.2021 20:20
Mathematics, 02.02.2021 20:20
Geography, 02.02.2021 20:20
Social Studies, 02.02.2021 20:20
Mathematics, 02.02.2021 20:20
Spanish, 02.02.2021 20:20
Chemistry, 02.02.2021 20:20
Mathematics, 02.02.2021 20:20
Mathematics, 02.02.2021 20:20
Mathematics, 02.02.2021 20:20