Engineering, 19.11.2020 21:40 fqjenfiq6959
Which of the following statements is true of the process for forming a footing.
The median measurement between high and low points becomes the grade for the footing.
The upside forms are set up first.
The inside forms are set up first.
The high point becomes the grade for the footing.
Answers: 2
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:10
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
Engineering, 04.07.2019 18:10
An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0
Answers: 3
Which of the following statements is true of the process for forming a footing.
The median measurem...
Mathematics, 23.01.2021 01:00
Mathematics, 23.01.2021 01:00
English, 23.01.2021 01:00
English, 23.01.2021 01:00
Mathematics, 23.01.2021 01:00
Mathematics, 23.01.2021 01:00
History, 23.01.2021 01:00
Mathematics, 23.01.2021 01:00
History, 23.01.2021 01:00
English, 23.01.2021 01:00