Engineering, 25.11.2020 14:40 0IggyMarie0

There is a mixing chamber connected with a valve. The chamber has two inlets and one exits. Liquid water at 200 kPa and 20 °C is heated in a chamber by mixing it with superheated steam at 200 kPa and 200 °C. Liquid water enters the mixing chamber at a rate of 2.5 kg/s, and the chamber is estimated to lose heat to the surrounding air at a rate of 1200 kJ/min. The mixture leaves the mixing chamber at 200 kPa and 70 °C. Assume steady state and ignore kinetic and potential energy effects. Assume there is no work or heat involved in the valve. Required:
a. If take the mixing chamber as the control volume, please list the simplified energy conservation equation for this CV.
b. If taking the mixing chamber and the valve as the combined control volume, please list the simplified energy conservation equation for this CV (leave it in symbolic form).
c. What is the mass flow rate at state 2?
d. There is a valve at the exit of the chamber to reduce the pressure to 20 kPa, determine the temperature at the exit of the valve

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k

Answers: 2

Answer

Engineering, 04.07.2019 19:10

How to increase the thermal officiency of an ideal simple rankino cycle? among these methods, which one is the best and why?

Answers: 2

Answer

You know the right answer?

There is a mixing chamber connected with a valve. The chamber has two inlets and one exits. Liquid w...

Questions