Engineering, 27.11.2020 04:50 brainewashed11123
At a location with an external angle (DELTA) of 30 degrees a curve of radius 1000 ft is used along with a spiral transition curve with k-value of 3 degrees per 100 feet. Calculate the length of each curve segment. Describe the reasons for using a spiral curve.
Answers: 3
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Engineering, 04.07.2019 18:10
Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)
Answers: 3
At a location with an external angle (DELTA) of 30 degrees a curve of radius 1000 ft is used along w...
Mathematics, 17.06.2021 20:30
Mathematics, 17.06.2021 20:30
Mathematics, 17.06.2021 20:30
Mathematics, 17.06.2021 20:30
History, 17.06.2021 20:30
Mathematics, 17.06.2021 20:30
Mathematics, 17.06.2021 20:30
History, 17.06.2021 20:30
Mathematics, 17.06.2021 20:30
Biology, 17.06.2021 20:30