Engineering, 30.11.2020 03:40 bfredfred1737
I have a 2” by 8” beam that is 10 feet long. The E is 1,750,000 psi. Find the max deflection in both the plank and joist positions with a 500 lb load.
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
Engineering, 04.07.2019 18:10
If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79
Answers: 1
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
You know the right answer?
I have a 2” by 8” beam that is 10 feet long. The E is 1,750,000 psi. Find the max deflection in both...
Questions
History, 26.02.2021 23:40
Mathematics, 26.02.2021 23:40
Mathematics, 26.02.2021 23:40
Mathematics, 26.02.2021 23:40
Mathematics, 26.02.2021 23:40
English, 26.02.2021 23:40
Mathematics, 26.02.2021 23:40
English, 26.02.2021 23:40
Mathematics, 26.02.2021 23:40
Mathematics, 26.02.2021 23:40
Mathematics, 26.02.2021 23:40
Biology, 26.02.2021 23:40
