Engineering, 03.12.2020 03:20 norahramahi123
Exchange your isometric sketches with a partner. Peer review your partner’s sketches. Check each of the following for each sketch. Note effective feedback.
Are the sketch lines heavy, clear, and complete?
Does the sketch accurately represent the part?
If you measure an edge on the sketch, does the length agree with the dimensions on the graphic? Is this true for every edge length?
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:20
Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives
Answers: 2
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
Engineering, 04.07.2019 19:10
Acircular aluminum shaft mounted in a journal is shown. the symmetric clearance gap between the shaft and journal is filled with sae 10w-30 oil at t 30°c. the shaft is caused to turn by the attached mass and cord. develop and solve a differential equation for the angular speed of the shaft as a function of time.
Answers: 2
Engineering, 04.07.2019 19:20
A5 kg block of fe is dropped into a very large vat of water. the fe and water initial temperatures are 95 and 25 c, respectively. the fe final temperature is 25 c and the water can be treated as a thermal reservoir,. treated as a thermal reservoir take the water to be the system and determine the entropy generation. report vour answer in kj/k.
Answers: 1
You know the right answer?
Exchange your isometric sketches with a partner. Peer review your partner’s sketches. Check each of...
Questions
Mathematics, 06.05.2020 00:09
Biology, 06.05.2020 00:09
Mathematics, 06.05.2020 00:09
Computers and Technology, 06.05.2020 00:09
