A brine solution is 26% salt with 70.0 kg of water evaporated per hour. To produce 195 kg of pure salt (0% moisture) per day, how long should the process operate each day and how much brine must be fed to the evaporator per hour? The process should operate each day for ___ hours.
The amount of brine that must be fed to the evaporator is ___ kg/h.

- the process should operate each day for 7.9286 hours

- the amount of brine that must be fed to the evaporator is 94.594 kg/hr

Explanation:

Given that;

concentration of brine = 26%

so water concentration will be 100% - 26% = 74%

for evaporation of 70kg water per hour, residual is pure salt( 0% moisture)

so mass flow rate of brine = 70/(74%) = 70/0.74 = 94.5945 kg/hr

Amount of pure dry salt produced(0%) = 94.5945 - 70 = 24.5945 kg/hr

Now for production of 195kg of pure dry salt, number of hours required will be

T = 195 / 24.5945 = 7.9286 hrs

Therefore the process should operate each day for 7.9286 hours.

Total brine solution required ( 26% salt conc.) = 195/0.26 = 750 kg

Feed rate of brine solution ( 26% salt conc.) = 750 / 7.9286 = 94.594 kg/hr

Therefore the amount of brine that must be fed to the evaporator is 94.594 kg/hr

the warning light flashes for a second or two when the engine starts. if it stays on, there's must be something wrong with the coolant. you should never dare to continue driving when the light is on. pull over as soon as possible and shut the engine off.

hope this is what you're talking about

answer:

i dont know the answer but good luck

explanation: