subject
Engineering, 06.12.2020 22:30 fainet

4.1. A liquid flows into a 5 m^3 tank at a flow rate of 3 kg/s and leaves at a rate of 2 kg/s. Initially, there is 1 m² of liquid in the tank.
(a) Classify the process as transient or steady-state
(b) Classify the process as batch, semi-batch, or continuous
(c) Write a mass balance for the process in terms of the general balance equation

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:20
Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options
Answers: 2
question
Engineering, 06.07.2019 02:30
Precipitation hardening can be achieved in many light alloys by a three-step heat treatment. what is carried out and what is the purpose at each step? why is such a treatment necessary based on the nucleation and growth theory of phase transformation. compare this treatment with tempering martensite for carbon steels (similarities and differences).
Answers: 1
question
Engineering, 06.07.2019 04:20
What is the fuid acceleration in vector form for the following velocity field? note i, j, and k are unit vectors. show all of your work.
Answers: 1
question
Engineering, 06.07.2019 05:10
The crank case of an automobile is 80 cm long 30 cm wide and 10 cm deep. find out the rate of heat flow from the crank case to the atmosphere when the automobile is moving at 90 km/hr. assume that the vibration of the engine and the chassis iaduce the transition from laminar to turbulent boundary layer may be considered over the entire surface. also find out the drag force on the total surface of the crank case. take the same average convective heat transfer coefficient and average shear stress for front and rare surfaces as for the bottom rnd sides crank case surface temperature is 75°c and atmospheric air temperature is 5 c
Answers: 2
You know the right answer?
4.1. A liquid flows into a 5 m^3 tank at a flow rate of 3 kg/s and leaves at a rate of 2 kg/s. Initi...
Questions
Questions on the website: 13722361