Engineering, 13.12.2020 23:50 imthatsavageboi

I need help with creating a Residual Valuation Calculation for a site I have chosen for my 'Office to Residential Conversion assignment' which is due on 18th December 2020. See the site details below: Chosen Site:-
Office for sale in Unit 10, Freeport Office Village, Braintree, Essex CM77
£550,000 (£240.91/sq. ft)
Purpose of site: Convert from its current use as an office to a residential building.
Assignment Tasks:
-Produce a detailed residual method valuation with references.
-Research comparable resale values or rental income that can be derived from the proposed development
-Demonstrate knowledge and understanding of the overall development process
-Create a development plan showing disposal and use, and design of the development

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 16:10

An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Fluids at rest possess no flow energy. a)- true b)- false

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

You know the right answer?

I need help with creating a Residual Valuation Calculation for a site I have chosen for my 'Office t...

Questions