Engineering, 16.12.2020 18:00 makennahudson94
In a compression test, a steel test specimen (modulus of elasticity 30 106 lb/in2 ) has a starting height 2.0 in and diameter 1.5 in. The metal yields (0.2% offset) at a load 140,000 lb. At a load of 260,000 lb, the height has been reduced to 1.6 in. Determine (a) yield strength and (b) fl ow curve parameters (strength coeffi cient and strain-hardening exponent). Assume that the cross-sectional area increases uniformly during the test.
Answers: 2
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
Engineering, 03.07.2019 15:10
If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.
Answers: 1
Engineering, 04.07.2019 18:10
The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false
Answers: 2
In a compression test, a steel test specimen (modulus of elasticity 30 106 lb/in2 ) has a starting h...
English, 11.11.2020 20:00
Mathematics, 11.11.2020 20:00
Mathematics, 11.11.2020 20:00
Advanced Placement (AP), 11.11.2020 20:00
English, 11.11.2020 20:00
Social Studies, 11.11.2020 20:00
Geography, 11.11.2020 20:00
Mathematics, 11.11.2020 20:00
Physics, 11.11.2020 20:00
English, 11.11.2020 20:00