subject
Engineering, 17.12.2020 17:20 izzxizzy

Steam enters a heavily insulated throttling valve at 11 MPa, 600°C and exits at 5.5 MPa. Determine the final temperature of the steam.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.
Answers: 2
question
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
question
Engineering, 06.07.2019 04:10
An inventor claims to have developed a reversed heat engine (ie. a heat pump) which is able to deliver 10 kj heat into the room at 20°c from outside ambient temperature of -10°c by consuming only 2 kj electricity in winter. this claim is a)-impossible b)-possible only if the heat pump is ideal c)-practically possible d)-unable to be assessed as it depends on the working fluid used in the heat pump.
Answers: 2
question
Engineering, 11.07.2019 00:40
Anormal toothed involute standard spur gear with z=21 teeth, modulus m-3mm and pressure angle a=20°. calculate the reference circle diameter dof this gear, base circle diameter di, addendum diameter da and the pressure angle of the tooth profile curve on the addendum circle.
Answers: 1
You know the right answer?
Steam enters a heavily insulated throttling valve at 11 MPa, 600°C and exits at 5.5 MPa. Determine...
Questions
question
Computers and Technology, 24.08.2021 18:50
question
Mathematics, 24.08.2021 18:50
question
Mathematics, 24.08.2021 18:50
question
Mathematics, 24.08.2021 18:50
Questions on the website: 13722363