subject
Engineering, 21.12.2020 14:00 tyler9585

After learning all about the long and complex journey that a seed takes to go from the field to storage (or even to the dinner table) you are going to take all of this newfound knowledge to create a visual representation of this journey! Start by reviewing the journey that a seed goes on from field to storage and make a list highlighting all of the key stops along this journey. Next, either on paper by hand or digitally, you will create a drawing of some kind of winding road…it does not need to be a magnificent work of art; it only needs to express the idea of a winding road for metaphorical purposes. If you do decide to do this digitally, you may need to use several slides or several pages on whatever program you use to make the “road” long enough to include all of the steps along a seed’s journey. Once you have drawn your “road,” either digitally or by hand, you will be adding facts, info, and images to make a mural-type, visually informative illustration of the road a seed takes! For each step along a seeds journey, you will need to include a brief description, any correlating facts, and an image. You should space out the steps appropriately along the road and make sure they go in the correct order. Write START at the place on your road where a seeds journey begins and END where it ends to make sure that this is clear. Feel free to infuse this activity with your own creativity in whatever way you see fit—just make sure that all of the information is there. A couple of “winding road” examples:

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
question
Engineering, 04.07.2019 18:10
You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?
Answers: 1
question
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
question
Engineering, 06.07.2019 03:10
What is the direction and how to operate the lathe?
Answers: 2
You know the right answer?
After learning all about the long and complex journey that a seed takes to go from the field to stor...
Questions
question
English, 08.07.2021 02:20
question
Mathematics, 08.07.2021 02:20
question
Mathematics, 08.07.2021 02:30
question
SAT, 08.07.2021 02:30
question
Health, 08.07.2021 02:30
question
English, 08.07.2021 02:30
Questions on the website: 13722359