subject
Engineering, 26.12.2020 04:00 jamarengle2

A four-legged, pre-timed signalized intersection has four approaches: northbound (NB), southbound (SB), eastbound (EB), and westbound (WB). The intersection has an 80-second signal cycle. Each approach has a constant saturation flow rate of 2400 veh/h. The NB, SB, EB, and WB approaches have effective green times (in seconds) of 25, 22, 23, and 21, respectively. The total flow rates for NB, SB, EB, and WB approaches (in Veh/h) are 480, 470, 505, and 595, respectively. These traffic flows account for the peak 15-min period. At the start of the analysis period, there were no initial queues in the SB, and WB approaches. However, in the NB and EB approaches, there were initial queues at the start of the analysis period, and the average delay per vehicle due to these initial queues in each NB and EB approach was 4 seconds. It is known that the upstream signal does not have any impact on the randomness of the arrival pattern at this intersection. Determine the level of service (LOS) for the NB, and EB approaches.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:20
A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.
Answers: 3
question
Engineering, 04.07.2019 19:10
How to increase the thermal officiency of an ideal simple rankino cycle? among these methods, which one is the best and why?
Answers: 2
question
Engineering, 04.07.2019 19:10
Acircular aluminum shaft mounted in a journal is shown. the symmetric clearance gap between the shaft and journal is filled with sae 10w-30 oil at t 30°c. the shaft is caused to turn by the attached mass and cord. develop and solve a differential equation for the angular speed of the shaft as a function of time.
Answers: 2
question
Engineering, 04.07.2019 19:20
Determine (a) the maximum thermal efficiency of reversible power cycles operating between a hot reservoir at 1000°c and a cold reservoir at 200°c and (b) the maximum cops for reversible refrigeration and heat pump cycies, respectively, between 28°c and 14°c.
Answers: 1
You know the right answer?
A four-legged, pre-timed signalized intersection has four approaches: northbound (NB), southbound (S...
Questions
question
Mathematics, 17.08.2020 17:01
question
Mathematics, 17.08.2020 18:01
Questions on the website: 13722360