Engineering, 27.12.2020 15:50 emmagossett2002

Oil at a mass flow rate of 15,000 lbm/hr is heated in a heat exchanger from 800F to 2050F. The heat capacity of the oil can be assumed constant at 0.49 BTU/lbm-0F. The oil flows through the inside of the tubes (1.0-in. inside diameter and combined length of 400 ft). The required heat is supplied by saturated steam condensing on the outside of the tubes, keeping the temperature of the inside surface of the tubes at a constant value of 2150F. Calculate:
a. The total rate of heat transfer, in BTU/hr.
b. The total surface area for heat transfer, in ft^2.
c. The logarithmic mean temperature difference, in 0°F.
d. The heat-transfer coefficient based on the logarithmic mean temperature difference, in BTU/hr-ft^2-0F.

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables

Answers: 1

Answer

You know the right answer?

Oil at a mass flow rate of 15,000 lbm/hr is heated in a heat exchanger from 800F to 2050F. The heat...

Questions