Engineering, 29.12.2020 14:00 webbhlharryteach
a centrifugal pump delivers water at the rate of 50kg/is . the inlet and outlet pressure are 2 bar and 6.2 bar respectively. the suction is 2.2 m below the center of the pump and delivery is 8.5 m above the above the center of the pump. the suction and delivery pipe diameter are 200 mm and 100 mm respectively. determine the capacity of the electric motor considering the efficiency of motor as 80℅to run the pump.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 19:10
What are the major differences between injection molding and extrusion?
Answers: 2
Engineering, 04.07.2019 19:10
The proportional limit is always greater than the yield strength for a material. a)-trune b)- false
Answers: 3
Engineering, 04.07.2019 19:10
Arigid tank contains 10 kg of air at 137 kpa (abs) and 21°c. more air is added to the tank until the pressure and temperature rise to 242 kpa (abs) and 32°c, respectively. determine the amount of air added to the tank. [r-0.287 kj/kg k]
Answers: 3
You know the right answer?
a centrifugal pump delivers water at the rate of 50kg/is . the inlet and outlet pressure are 2 bar a...
Questions
Mathematics, 16.04.2020 00:27
Biology, 16.04.2020 00:27
History, 16.04.2020 00:27
History, 16.04.2020 00:27
Mathematics, 16.04.2020 00:27
Mathematics, 16.04.2020 00:27
Mathematics, 16.04.2020 00:27
Computers and Technology, 16.04.2020 00:27
Mathematics, 16.04.2020 00:27
Mathematics, 16.04.2020 00:28
