Engineering, 31.12.2020 18:10 ggpro4life3000
A hollow steel tube has a diameter of 300 mm, wall thickness of 20 mm and a length of 500 mm.
A slot 20 mm wide is machined through the wall thickness and along the whole length of the
tube. The tube is positioned on a rigid horizontal surface with the slot at one extreme of a
horizontal diameter. A force W is then applied on the upper surface along the vertical diameter
and uniformly along the length of the tube. Calculate the magnitude of this force which is
necessary to just close the slot
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 12:10
On a average work day more than work place firs are reorted
Answers: 1
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
Engineering, 04.07.2019 19:10
Agas is compressed from vi 0.3 m, p 1 bar to of v2 0.1 m3, p2--3 bar. pressure and volume are related linearly during the process. for the gas, find the work, in kj.
Answers: 2
Engineering, 04.07.2019 19:20
The power source in a certain welding setup generates 3500w that is transferred to the low carbon steel work with a heat transfer factor of 0.85. the melting factor in the operation is 0.45. a continuous fillet weld is to be made with a cross-sectional area of 23 mm2 determine the travel speed at which the welding can be accomplished.
Answers: 3
You know the right answer?
A hollow steel tube has a diameter of 300 mm, wall thickness of 20 mm and a length of 500 mm.
A slo...
Questions
Mathematics, 30.01.2021 03:40
Advanced Placement (AP), 30.01.2021 03:40
Mathematics, 30.01.2021 03:40
Mathematics, 30.01.2021 03:40
Mathematics, 30.01.2021 03:40
Engineering, 30.01.2021 03:40
Mathematics, 30.01.2021 03:40
Social Studies, 30.01.2021 03:40
Social Studies, 30.01.2021 03:40
