NEED HELP FOR MY ELECTRICITY CLASS ASAP!
...
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
Engineering, 04.07.2019 19:10
Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.
Answers: 1
You know the right answer?
Questions
Physics, 11.07.2019 08:30
Mathematics, 11.07.2019 08:30
Mathematics, 11.07.2019 08:30
Mathematics, 11.07.2019 08:30
Mathematics, 11.07.2019 08:30
Mathematics, 11.07.2019 08:30
History, 11.07.2019 08:30
Mathematics, 11.07.2019 08:30
Computers and Technology, 11.07.2019 08:30
Mathematics, 11.07.2019 08:30
Mathematics, 11.07.2019 08:30
English, 11.07.2019 08:30
English, 11.07.2019 08:30
Mathematics, 11.07.2019 08:30
English, 11.07.2019 08:30
History, 11.07.2019 08:30
