Answers: 2
Another question on Engineering
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
Engineering, 06.07.2019 03:30
Abrayton cycle operates with a regenerator on the air-standard with properties evaluated at 400 k. the tem- perature of the air entering the compressor is 350k while the temperature of the air exiting the compressor is 600 k. the temperature of the air entering the turbine is 1600 k. the overall cycle produced 600 kj/kg of net work out. assuming a regenerator effectiveness of 0.8, what is the temperature of the air before heat addition (combustion)? draw this process on a t - s diagram
Answers: 3
You know the right answer?
Did the space shuttle have a hatch on the roof for escape?...
Questions
Chemistry, 22.08.2019 05:30
Chemistry, 22.08.2019 05:30
Chemistry, 22.08.2019 05:30
Mathematics, 22.08.2019 05:30
History, 22.08.2019 05:30
Social Studies, 22.08.2019 05:30
Mathematics, 22.08.2019 05:30
English, 22.08.2019 05:30
Mathematics, 22.08.2019 05:30
Biology, 22.08.2019 05:30
Mathematics, 22.08.2019 05:30
Mathematics, 22.08.2019 05:30
Advanced Placement (AP), 22.08.2019 05:30
History, 22.08.2019 05:30
