A tensile load of 190 kN is applied to a round
metal bar with a diameter of 16mm and a gauge
...
Engineering, 12.01.2021 07:50 bliss6115
A tensile load of 190 kN is applied to a round
metal bar with a diameter of 16mm and a gauge
length of 50mm, Under this load, the bar drastically
deforms so that the gauge length increases to 50.1349
mm and the diameter decreases to 15.90 mm. Determine
the modulus of elasticity and Poisson's
ratio for this
metal.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
Engineering, 06.07.2019 02:30
In a unit cell of fcc structure, indicate the position of one of the tetrahedral interstitial sites by plotting the corresponding tetrahedron. do the same for one of the octahedral interstitial sites (in a separate fcc unit cell). mark the positions of all the tetrahedral and octahedral interstitial sites in the unit cells. how many equivalent tetrahedral sites and how many equivalent octahedral sites are contained in a fcc unit cell, respectively. what is the coordination number for a tetrahedral site and what is the coordination number for an octahedral site?
Answers: 2
You know the right answer?
Questions
Computers and Technology, 10.12.2019 21:31
