Engineering, 12.01.2021 17:30 ctyrector

The steel bar with the geometry has an axial fluctuating load applied from -5000 lbf to 12000 lbf. The bar has a hole with a 0.25 inch diameter, is 0.25 inches thick, a fillet radii of 0.175 inches, and a notch sensitivity factor q = 0.95. The fully adjusted endurance limit of the bar is 40 ksi, the bar has an ultimate strength of 185 ksi, and a fatigue strength fraction f = 0.78. Using the Goodman criteria, determine the most conservative N to design to, where N is the life of the bar in terms of cycles to failure. a. Less than 1 cycle
b. 1 to 5 cycles
c. 17000 to 29000 cycles
d. 40000 to 60000 cycles
e. 63000 to 80000 cycles
f. 5 to 6 million cycles
g. Infinite life

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]

Answers: 1

Answer

Engineering, 04.07.2019 19:10

Agas is compressed from vi 0.3 m, p 1 bar to of v2 0.1 m3, p2--3 bar. pressure and volume are related linearly during the process. for the gas, find the work, in kj.

Answers: 2

Answer

Engineering, 06.07.2019 06:10

The high degree of flatness achieved in modern architectural plate glass is the result of the float glass process in which the layer of glass is drawn across a bath of molten tin. ( true , false )

Answers: 1

Answer

You know the right answer?

The steel bar with the geometry has an axial fluctuating load applied from -5000 lbf to 12000 lbf. T...

Questions