Engineering, 13.01.2021 17:50 Gghbhgy4809

determine the steady state temperature distribution between two concentric spheres with radii 1 and 4

Answers: 3

Show answers

Answers

Answer from: onlymyworld27

Hence, the steady state temperature distribution between concentric spheres with radii 1 and 4 is:

u = $\frac{C1}{r }$ + C2

u = $\frac{\frac{-320}{3} }{r}$ + $\frac{320}{3}$

Explanation:

Solution:

Note: This question is incomplete and lacks necessary data to solve this question. But I have found a similar question and will try to solve it.

This question has this following part missing:

"If the temperature of the outer sphere is maintained at 80 degrees and the inner sphere at 0 degrees.

Now, this question is complete.

Let's find out the steady state temperature distribution.

As, we know the spherical symmetric heat equation:

$\frac{du}{dt}$ = $\frac{k}{r^{2} }$ $\frac{D}{Dr}$ ( $r^{2}$ $\frac{Du}{Dr}$ )

Where, small (d) represents the partial differentiation and Capital D represents simple derivative.

And the ordinary differential equation (ODE) for steady state temperature distribution is:

$\frac{k}{r^{2} }$ $\frac{D}{Dr}$ ( $r^{2}$ $\frac{Du}{Dr}$ ) = 0

So it can be said that:

$r^{2}$ $\frac{Du}{Dr}$

Consequently,

$\frac{Du}{Dr}$ = $\frac{C1}{r^{2} }$

Taking derivative of the above equation we get:

u = - $\frac{C1}{r }$ + C2

Solution of the ordinary differential equation

u = $\frac{C1}{r }$ + C2 (Consuming the negative sign into C1 constant)

As, it is given in our question that our boundary conditions are: 1 and 4

So,

Putting the boundary conditions into the variable (r) to find the constants we get:

u1 = $\frac{C1}{1} }$ + C2 = 0 (degrees)

u1 = C1 + C2 = 0 (degrees) equation (1)

Similarly,

u4 = $\frac{C1}{4}$ + C2 = 80 (degrees)

u4 = $\frac{C1}{4}$ + C2 = 80 (degrees) equation (2)

Solving for C1, we get:

Equation 1 - Equation 2

(C1 - C2 = 0) - ( $\frac{C1}{4}$ + C2 = 80)

$\frac{-3}{4}$ C1 = 80

Solving for C1

C1 = - $\frac{320}{3}$

With the help of value of C1, we get value of C2

Put the value of C1 in equation (1) to get value of C2

C1 + C2 = 0

- $\frac{320}{3}$ + C2 = 0

Solving for C2

C2 = $\frac{320}{3}$

Hence, the steady state temperature distribution between concentric spheres with radii 1 and 4 is:

u = $\frac{C1}{r }$ + C2

Plugging in the values of C1 and C2

u = $\frac{\frac{-320}{3} }{r}$ + $\frac{320}{3}$

Answer from: Quest

the equation above shows how temperature f, measured in degrees fahrenheit, relates to a temperature c, measured in degrees celsius. based on the equation, which of the following must be true?

a temperature increase of 1 degree fahrenheit is equivalent to a temperature increase of

degree celsius.

a temperature increase of 1 degree celsius is equivalent to a temperature increase of 1.8 degrees fahrenheit.

a temperature increase of

degree fahrenheit is equivalent to a temperature increase of 1 degree celsius.

a) i only

b) ii only

c) iii only

d) i and ii only

Answer from: Quest

Yes, yes they do sir

Another question on Engineering

Engineering, 03.07.2019 23:20

Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct

Answers: 3

Answer

Engineering, 04.07.2019 18:10

The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer

Answers: 2

Answer

Engineering, 04.07.2019 18:20

A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?

Answers: 3

Answer

You know the right answer?

determine the steady state temperature distribution between two concentric spheres with radii 1 and...

Questions