subject
Engineering, 14.01.2021 21:00 andrewmena05

ANSWER EACH QUESTION PL 3. A jar made of 3/16 inch thick glass has an inside radius of 3.00 inches and total height of 6.00 inches (including the bottom thickness of glass). The glass has a density of 165 lb/ft3. The jar is placed in water with a density of 62.5 lb/ft3.

a. Assume the jar sits upright in the water without tipping over. How far will the empty jar sink into the water?
i. What is the volume of the glass shell of the jar? Precision 0.00

ii. What is the weight of the jar? Precision 0.00

iii. What is the weight of water the empty jar will displace? Precision 0.00

iv. What is the volume of water the empty jar will displace? Precision 0.00

v. How far will the empty jar sink?

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 19:10
What are the major differences between injection molding and extrusion?
Answers: 2
question
Engineering, 04.07.2019 19:10
Estimate the change in specific internal energy au and specific enthalpy h from inlet to outlet for ethylene glycol (a liquid) flowing through each of the following devices: (a) a heat exchanger where the glycol temperature increases from 20 °c to 80 °c; (b) a pump operating at about 25 °c and increasing the glycol pressure from 100 kpa to 8 mpa.
Answers: 2
question
Engineering, 04.07.2019 19:20
Apreheater involves the use of condensing steam at 100°c on the inside of a bank of tubes to heat air that enters at 1 atm and 25°c. the air moves at 5 m/s in cross flow over the tubes. each tube is 1 m long and has an outside diameter of 10 mm. what is the minimum value of nl needed to achieve an outlet temperature of t 75 c? what is the corresponding pressure drop across the tube bank?
Answers: 3
question
Engineering, 06.07.2019 03:10
Air is flows through an adiabatic nozzle with an inlet pressure of 400 psia at a temperature of 300°f and a velocity of 20 ft/s. the outlet pressure is 40 psia and the velocity is 800 ftl/s. determine the outlet temperature of the air using: a) property tables b) specific heat (using the specific heat value for air at 300°f)
Answers: 3
You know the right answer?
ANSWER EACH QUESTION PL 3. A jar made of 3/16 inch thick glass has an inside radius of 3.00 inches...
Questions
question
Biology, 16.07.2019 20:30
Questions on the website: 13722361