Drag the tiles to the correct boxes to complete the pairs. Which measuring device would one use for a particular scenario.
altimeter
digital micrometers
charge-coupled devices
magnetic resonance imaging
Mia wants to measure charge and convert
it into electrical signals.
arrowRight
Dr. Jerry wants to measure the damages in the
tissue of the body and thus diagnose illnesses.
arrowRight
John wants to measure the length, diameter, or
thickness of objects in mechanical engineering.
arrowRight
Mario is a pilot and wants to measure altitude of
the plane flying in the air.
arrowRight

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned

Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation