Engineering, 16.01.2021 02:40 jeniscool
Drag the tiles to the correct boxes to complete the pairs.
Match each engineering job role to its description.
project engineer
planning engineer
chief engineer
field engineer
office engineer
heads the engineering department and
ensures that it operates smoothly
arrowRight
performs administrative work to ensure
projects comply with engineering codes
and standards
arrowRight
performs a variety of onsite tasks, such
as supervision and equipment installation
arrowRight
ensures projects end on time through
careful planning and organization
arrowRight
ensures proper sequencing of events to
minimize project duration
arrowRight
Answers: 3
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Drag the tiles to the correct boxes to complete the pairs.
Match each engineering job role to its d...
Mathematics, 16.02.2020 01:09
Health, 16.02.2020 01:09
Mathematics, 16.02.2020 01:10
English, 16.02.2020 01:10
History, 16.02.2020 01:10
Geography, 16.02.2020 01:10
English, 16.02.2020 01:11
Mathematics, 16.02.2020 01:12
Physics, 16.02.2020 01:13
Mathematics, 16.02.2020 01:13
Mathematics, 16.02.2020 01:14
Computers and Technology, 16.02.2020 01:14