6.A rod made of composite material is placed between rigid supports (This could be similar to a frp composite bridge deck). At 25C the rod fits perfectly between the rigid supports and there is no stress in the system. What temperature would the composite need to be cooled to in order for the composite to crack if it has a coefficient of thermal expansion of 30x10-6 mm/mm/C, a strength of 15 ksi, and an elastic modulus of 20,000 ksi. Assume the composite behaves as a linear elastic material

A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?