Engineering, 18.01.2021 21:40 akepa
3. Water is the working fluid in an ideal Rankine cycle. The condenser pressure is 10 kPa (0.10 bar), and saturated vapor enters the turbine at 18 MPa (180 bar). The net power output of the cycle is 100 MW. For this cycle determine the: a) mass flow rate of the steam, in kg/h. b) heat transfer rates for the working fluid passing through the boiler and condenser, each in kW. c) thermal efficiency of the cycle.
Answers: 1
Engineering, 04.07.2019 18:10
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.
Answers: 1
Engineering, 04.07.2019 19:10
When subject to a steady load (within elastic range) over a long period of time, what is the major difference in material behavoir between steel and plastic?
Answers: 2
3. Water is the working fluid in an ideal Rankine cycle. The condenser pressure is 10 kPa (0.10 bar)...
Mathematics, 06.10.2019 23:20
Chemistry, 06.10.2019 23:20
Mathematics, 06.10.2019 23:20
Mathematics, 06.10.2019 23:20
Mathematics, 06.10.2019 23:20
Chemistry, 06.10.2019 23:20
English, 06.10.2019 23:20
Mathematics, 06.10.2019 23:20
Biology, 06.10.2019 23:20