Engineering, 18.01.2021 22:40 saifulcrc1397
OpAmps are key active building blocks in elec- trical circuits, and are commonly used in many applications such as amplifying sensor signals, or implementing various lters and compensators in electronic controllers. Due to very high open-loop gain, OpAmps are typically used with negative feedback, and with proper characteristics, the closed- loop gain of the ampli er can be controlled primarily by the
Answers: 1
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:10
During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false
Answers: 2
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
OpAmps are key active building blocks in elec- trical circuits, and are commonly used in many applic...
Geography, 31.08.2019 17:50
Mathematics, 31.08.2019 17:50
Biology, 31.08.2019 17:50
Biology, 31.08.2019 17:50
Mathematics, 31.08.2019 17:50
Mathematics, 31.08.2019 17:50
Physics, 31.08.2019 17:50
Health, 31.08.2019 17:50
Health, 31.08.2019 17:50