Engineering, 20.01.2021 01:10 rebeckas0102
In this question, you will design a circuit that will detect if a given digit (0,1,2,39) is in your student number
or not. For example if your student number is 16050511028 and you are given a digit 9, your output should be 0.
If you are given a digit 6, your output should be 1. Design this circuit using only 1-to-4 demultiplexers and OR
gates. You can use logic 0 and logic l as well. You need to design the most simplified circuit with these
components.
Answers: 3
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
Engineering, 04.07.2019 18:20
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
Engineering, 04.07.2019 19:10
An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed
Answers: 3
In this question, you will design a circuit that will detect if a given digit (0,1,2,39) is in your...
History, 24.04.2020 22:25
Social Studies, 24.04.2020 22:25
Chemistry, 24.04.2020 22:25
Mathematics, 24.04.2020 22:25
Biology, 24.04.2020 22:25
English, 24.04.2020 22:25
Mathematics, 24.04.2020 22:25
Mathematics, 24.04.2020 22:25