A semicircular or circular torch movement should be used when
depositing weld beads.
*
...
Engineering, 21.01.2021 01:50 tladitidimatso3976
A semicircular or circular torch movement should be used when
depositing weld beads.
*
true
False
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
Engineering, 04.07.2019 18:20
Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k
Answers: 2
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
Engineering, 04.07.2019 19:10
With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.
Answers: 1
You know the right answer?
Questions
History, 27.01.2021 01:00
English, 27.01.2021 01:00
Physics, 27.01.2021 01:00
Mathematics, 27.01.2021 01:00
Mathematics, 27.01.2021 01:00
Advanced Placement (AP), 27.01.2021 01:00
Biology, 27.01.2021 01:00
Mathematics, 27.01.2021 01:00
Chemistry, 27.01.2021 01:00
