Engineering, 21.01.2021 22:40 soleil26

Please help ( true or false questions)69. Secure the work with clamps or the vise. _70. Check to see the sanders switch is in the on position before plugging in
-71. Replace sandpaper after plugging into the electrical outlet.
72. Tuming offthe dust collection system.
73. Don't force the machine. Use only the weight of the machine to do the
sanding
74. Watch where the cord is so you get it caught in the machine.
75. Don't put the machine down until it stops moving.
76. Pretend the sander is a race car and has to be revved up so you look cool.
Saber Saw Test
77. Wear safety glasses.
_78. Make all adjustments with the power cord plugged in.
79. Check to see that the switch is off before plugging in the machine.
80. Overload the machine by cutting too fast.
Meeting in "General
81. Keep fingers and power cords a safe distance from the blade.
RS
82. Use a four inch safety margin.
83. Make relief cuts to avoid tuming the blade too sharp.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges

Answers: 1

Answer

Engineering, 04.07.2019 19:10

A)-in the process of engineering design, explain the contribution of material selection. b)- explain the procedure of synthesis as is employed in engineering design. c)- is there any relationship between ergonomics and engineering design? explain. d)- safety consideration in engineering design includes human, product and the enviroment . explain how safety will be incorporated into the design?

Answers: 3

Answer

Engineering, 04.07.2019 19:10

Agas is compressed from vi 0.3 m, p 1 bar to of v2 0.1 m3, p2--3 bar. pressure and volume are related linearly during the process. for the gas, find the work, in kj.

Answers: 2

Answer

Engineering, 04.07.2019 19:20

Air enters a horizontal, constant-diameter heating duct operating at steady state at 290 k, 1 bar, with a volumetric flow rate of 0.25 m°/s, and exits at 325 k, 0.95 bar. the flow area is 0.04 m2. assuming the ideal gas model with k = 1.4 for the air, determine (a) the velocity at the inlet and exit, each in m/s, and (c) the rate of heat transfer, in kw flow rate, in kg/s, (b) the mass kg 0.3

Answers: 2

Answer

You know the right answer?

Please help ( true or false questions)69. Secure the work with clamps or the vise. _70. Check to se...

Questions