subject
Engineering, 22.01.2021 14:10 shelovejaylocs

2 points A wheel barrow is used to lift 140 lbs of dirt. The length from the wheel
axle to the center of the load is 2 ft. The length from the wheel and axle to
the effort is 6ft. What is the ideal mechanical advantage of the system?

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false
Answers: 2
question
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
question
Engineering, 04.07.2019 18:10
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
question
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
You know the right answer?
2 points A wheel barrow is used to lift 140 lbs of dirt. The length from the wheel
axle to th...
Questions
question
Mathematics, 27.05.2021 21:00
question
Mathematics, 27.05.2021 21:00
question
English, 27.05.2021 21:00
question
Mathematics, 27.05.2021 21:00
Questions on the website: 13722367