You worked on Earthquake Engineering Design Challenge during the last three parts. Please upload your S. T.E. M. Lab Earthquake Engineering Design Challenge worksheet. Make sure that you have answered all parts for Steps 1–13 and your work is shown on the worksheet and double check your work. When you are sure that you have answered all of the Steps accurately, please upload your worksheet.

The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false

Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.

Apressure vessel with an r/t 20 cannot be treated as thin walled vessel. a)-trune b)- false