subject
Engineering, 26.01.2021 01:00 raenfall455

For a stable system, the time to reach steady state can be estimated as four times the time constant of the slowest pole. When a system is stable, all poles are in the left half plane (LHP). The slowest pole is the one with the largest (least negative) real part. For each stable system, approximately how long will it take for the steady state condition to be achieved. The time constant is the reciprocal of the absolute value of the real part of the pole location. Problem System Input u(t) = sin(1t) u(t) = 10 sin(10t) u(t) = cos(5t) u(t) = sin(3t) u(t) = sin(wt) u(t) = cos(t) u(t) = sin(wt) u(t) = 10 sin(wt) u(t) = cos(3t) u(t) = sin(10t) u(t) = sin(wt) u(t) = sin(t) s2+101 1| H(s) = G+2s+1) H(s) = F10 2 3 H(s) = t5 4 H(s) = 10 5| Н() — — 6 H(s) = +10)(s+1) s-1 7 H(s) = 1010 8 H(s) = s+10 9 H(s) %3D s+3 +100 (s2+200s+100) H(s) H(s) = H(s) = 10 11 S-10 s-1 (s+10)(s+1) +4 (s+10)(s+1) 12 13 | Н() u(t) = cos(2t) %3D

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
question
Engineering, 04.07.2019 18:10
If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79
Answers: 1
question
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
question
Engineering, 04.07.2019 18:10
You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?
Answers: 1
You know the right answer?
For a stable system, the time to reach steady state can be estimated as four times the time constant...
Questions
question
Mathematics, 25.06.2019 18:30
question
Mathematics, 25.06.2019 18:30
Questions on the website: 13722360