Engineering, 31.01.2021 21:00 NewKidnewlessons
The tool life decreases from 0.8 min to 0.2 min due to the increase in cutting speed from 60 m/min to 120 m/min in a turning operation.
Compute is the value of the cutting speed at 0.4 min.
a-)Determine the spindle speed in rpm.
b-)Find the required power for the unit force.
c-)The friction between tool and workpiece varies 0.25-0.35 during the process.
d-)Calculate the rate of maximum force to minimum force.
Answers: 2
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
Engineering, 04.07.2019 18:10
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
The tool life decreases from 0.8 min to 0.2 min due to the increase in cutting speed from 60 m/min t...