Use the diagram to determine the voltage at the load after calculating the voltage drop of the wire. Ra = 0.222
120 V
120 V
120 V
120 V
M
0.5 HP
100 W
100 W
75 W
EG
120 V
Rb = 0.222
Note: R and R, represent the resistance of the wire. The 120 volts of the motor and lamps is their rated voltage and
not the actual voltage.

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation

An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.