Engineering, 06.02.2021 02:20 jacobhinshaw7642
A circle of 10 mm diameter was printed on a sheet of metal before forming. After stamping, the circle became ellipse with major diameter of 13 mm and minor diameter of 11mm - Determine the 3 components of strains tensor - Determine the effective strain - Considering plane stress condition (σ3=0), calculate the ratio α = σ2/σ1
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:10
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
You know the right answer?
A circle of 10 mm diameter was printed on a sheet of metal before forming. After stamping, the circl...
Questions
Mathematics, 28.05.2021 18:10
English, 28.05.2021 18:10
Mathematics, 28.05.2021 18:10
History, 28.05.2021 18:10
Mathematics, 28.05.2021 18:10
Mathematics, 28.05.2021 18:10
History, 28.05.2021 18:10
Mathematics, 28.05.2021 18:10
Mathematics, 28.05.2021 18:10
Mathematics, 28.05.2021 18:10
