subject
Engineering, 06.02.2021 23:10 dathanboyd

Suppose a pictorial drawing specified four circles with radii of 1.25 each. How might those circles be specified? 4 x 1.25 R1.25 x 4 4 x R1.25 1.25 x 4

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
question
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
question
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
question
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
You know the right answer?
Suppose a pictorial drawing specified four circles with radii of 1.25 each. How might those circles...
Questions
question
Mathematics, 02.07.2019 04:40
question
Social Studies, 02.07.2019 04:40
question
Mathematics, 02.07.2019 04:40
question
Mathematics, 02.07.2019 04:40
question
Mathematics, 02.07.2019 04:40
question
Mathematics, 02.07.2019 04:40
question
Spanish, 02.07.2019 04:40
Questions on the website: 13722362