subject
Engineering, 08.02.2021 19:20 renegade2020

Assume that you have an incoming stream that contains 106 kg of wet gas (74.2 wt% methane, 15.6 wt% ethane, 5.5 wt% propane and the rest butane). The incoming stream is sent it to a separator (S1). Three streams leave the separator. Stream 2 is the top stream and contains only methane and ethane. Stream 2 contains 98% of the methane fed to the separator. Stream 3 is the middle stream and contains no butane. For every kg of methane in stream 3, there are 2.5 kg of ethane and 1.5 kg of propane. Stream 4 is the lower stream and contains only ethane, butane and propane. The mass flowrate of stream 4 is 10% of the incoming mass flowrate. Stream 4 is then sent to another separator (S2). Stream 5 leaves the top of S2 and contains 80% of the ethane and 50% of the propane entering S2 along with butane. Stream 6 leaves the bottom of S2 and contains all three components. The mass fraction of butane in stream 6 is 0.60. a. Draw and Label the diagram
b. Write equation(s) for the following statements:
1. For every kg of methane in stream 3, there are 2.5 kg of ethane and 1.5 kg of propane.
2. Stream 2 is the top stream and contains 98% of the methane fed to the separator.
3. The mass flowrate of stream 4 is 10% of the incoming mass flowrate.

c. Calculate the mass fraction of ethane in stream 2.
d. Calculate the mass of propane in stream 4.
e. Calculate the mass of butane in stream 5

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
question
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
question
Engineering, 04.07.2019 19:10
What is the main objective of using reheat rankine cycle?
Answers: 3
question
Engineering, 04.07.2019 19:10
Which of the following is the most important advantage of a large field of view? a. allows larger areas to be examined b. relieves eyestrain c. minimizes parallax errors. d. increases precision in proportion to the in- crease in field of view
Answers: 2
You know the right answer?
Assume that you have an incoming stream that contains 106 kg of wet gas (74.2 wt% methane, 15.6 wt%...
Questions
question
Mathematics, 29.05.2020 11:59
question
Biology, 29.05.2020 11:59
question
History, 29.05.2020 11:59
question
Mathematics, 29.05.2020 11:59
question
Biology, 29.05.2020 11:59
question
Mathematics, 29.05.2020 11:59
question
Mathematics, 29.05.2020 11:59
Questions on the website: 13722360